8000L/H Reverse Osmosis System Water Treatment Machine Water Purification Machine

One. Requirement and Design Consignment

(1) Source Water:Fresh water - spring water, river water, lake water, borehole/well water.

(2) Quality of Source Water:Test Report

(3) Quality of Output Water:Compliance with the standards of bottled drinking water

(4) Capacity of Output Water:8M3/h(25℃)

Two. Introduction of Water Purifying System

(1) Equipment Working Time:All day round (24 hours)

(2) Method of Water Supplying:Supply water without stop, supply water coherently

(3) Way of Operation:Mainly operated by auto controller, some parts by hands

Design Scope:From the entrance of source water to the exit of purified water

Configuration:

(1) Pre-treatment System:Quartz Sand filter + Active Carbon filter + PP sediment membranes filter

(2) Precise filtering System:Reverse osmosis Membrane equipment

(3) Other Equipments:Pure water tank, Ozone sterilizer, PLC controlling system.

The basic surroundings and / or settings for the water processing system

(1). Water supplying pipe: Install the water-supplying pipe at the water processing room, the pressure of water supplying must be more than 2Mpa, the water volume is more or less than 10 cubic meter, and there should be tunnels to discharge the wastewater.

(2). Electricity supply: The water room must have enough electricity to make the equipment running and the power should not less than 14KW.

(3). Workshop: The field which the whole water purifying equipments cover is 20meter(length) and 5meter(width), the air window should be set up to make sure the air is flowing in the room.

Working Flow of the System

Working Flow:

1. Source Water      2. Quartz Sand Filter     3. Active Carbon Filter      4. PP Sediment Filter     5. Reverse osmosis Membrane Equipment      6.Medicine Dosing Equipment   7.Ultraviolet Sterilizer    8. Pure Water Tank     9. Ozone Generator    10.Water Distribution System     11. Purified water user

Explanation of the Working Flow:

This system mainly consists of three parts:Pre-treatment,Reverse Osmosis Membrane Equipment and Accessories. Reverse Osmosis Membrane Equipment is the core equipment in the whole system, all the other equipments service for the Reverse Osmosis Membrane.

Trouble Resolve and Prevention for Pre-treatment (Source water supplying pump, quartz sand filter, active carbon filter, PP sediment filter):

A. Prevent the membranes from scaling(such as Fe3, Fe2, CaCO3, CaCO4, SrSO4, CaF2, SiO2, alanate, and etc.).

B. Prevent the Organic matter, microorganism, gummy matter and suspended solid particulates from blocking.

C. Keep the Reverse Osmosis Membrane Equipment in the stable water producing state.

1 Soure water supplying Pump:

This pump provides enough flow and pressure to the post processing equipment.

2 Quartz sand filter:

The Quartz sand filter which is mm of diameter and capacity of output water is  cubic meter per hour, flow speed of working state is 12 meter per hour, various types of quartz sand is filled in the filter and several layers are designed in the inside of the filter. When design the filter, one element must be taken into consideration that the force of backwash must be strong enough to make sure the process of backwash is completed. The reason why the equipment cannot work in a stable state mainly owe to the design defect of backwash. Because of this, the membranes are easy to be scaled. Considering that the time of backwash is not long, thus the filtering surface has not formed and the impure material is easy to get through the filter, which makes the filtering effect poor, that is why we slow down the flow speed to improve the filtering effect and reduce the influence to the next filter.

The force of backwash should strong enough to make the quartz sand inflation 15-25%, and when backwash, it had better have compressed air to make the quartz sand rub each other. The turbidity of output water from quartz sand filter should less than 1

3 Active Carbon Filter:is used to trap organic chemicals, and chlorine which will attack and degrade reverse osmosis membranes.

The function of this filter is mainly to get rid of the remaining chlorine and organic compounds, and to remove taste and odor and also remove some harmful contaminents.

Purified by the previous two filters, the water is basically compliance with the water-input requirement of purifying equipment:SDI≤4; 

4 PP sediment membranes filter:is used to trap particles including rust and calcium carbonate.

At the front of Reverse Osmosis Membrane Equipment, there must be a PP sediment membranes filter of which the flow capacity is m3/h. The function of PP sediment membranes filter is to block the granular material getting into the Reverse Osmosis Membrane Equipment and used for removal of sand, silt dirt and rust particles. Without this the Reverse Osmosis Membrane is easy to be damaged. In normal working condition, the life span of PP membrane is 1-3 months. It is easy to refill the PP cartridges.

Precise Filtering System:Reverse Osmosis Membrane Equipment and Medicine Dosing Equipment

1 Reverse Osmosis Membrane Equipment:

Reverse Osmosis membrane is the heart of this system. Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO technology involves the reversal of flow through a membrane from a high salinity, or concentrated solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane. Whether the Reverse Osmosis Membrane Equipment can or cannot reach the requirement of design is determined by the design of Reverse Osmosis membrane, it also determine the life span of Reverse Osmosis Membrane. The water processed through Reverse Osmosis Membrane Equipment is almost no bacteria, organic matter and microorganism.

The features of Reverse Osmosis Membrane Equipment include: high recycling rate, small field covering, automatic working, multifunctional, environment friendly, and etc.

2 The Configuration of Reverse Osmosis Membrane Equipment:

A． Reverse Osmosis Membrane

B． Booster Pump

C． Flow Meter

D． Pressure Monitor

E． Backwash Equipment

Controller Explanation:

The machine can work both automatically and manually. In manual working state, the equipment is operated separately, and in auto working state, the whole line is controlled as one machine. According to this fact, the pre-treatment filter should be manual controlled, the pump and Reverse Osmosis system should be auto controlled. Each unit of the machine has its own working monitor and meter, they have the function of self diagnose which is good for the machine's safe working.

Configuration

High pressure Pump:Stainless Steel Centrifugal Pump. 

The pump supplies the pressure needed to push water through the membrane, even as the membrane rejects the passage of salt through it.

parameter:

Model: 

Material:Stainless Steel 304

Flow:Max 120m3/H

Delivery height:Max 330m

Origin & Brand:Denmark Grndfos Pump

Quantity:1 Set

Quartz Sand Filter:The container is made from Stainless Steel 304, with Valve operation system, pipe system, filtering material, water distribution system, etc

Parameter:

Model:AF-14.0SC

Method of Working:Auto working by pressure, backwash by hands

Flow Speed:12-15m/h

Flow Capacity:20-25m3/H

Pressure:1.2Mpa

Diameter:Ømm

Height:mm

Wall Thickness:3mm

Material:Stainless Steel 304

Weight of Quartz Sand:2000KG

Filtering Material:Quartz Sand

Diameter of Quartz Sand:1-2.5mm

4.5-2.5mm

With:Pipe Valve 32PCS and other necessary accessories 

Stainless Steel panel

Pressure Meter 1 PCS

Origin:China

Quantity:1set

Active Carbon Filter: The container is made from Stainless Steel 304, with Valve operation system, pipe system, filtering material, water distribution system, etc

Parameter:

Model:

Method of Working:Auto working by pressure, backwash by hands

Flow Speed:12-15m/h

Flow Capacity:20-25m3/H

Pressure:1.2Mpa

Diameter:Ømm

Height:mm

Wall Thickness:3mm

Material:Stainless Steel 304

Weight of Active Carbon:750KG

Filtering Material:Active Carbon

Diameter of Active Carbon:1-2.5mm

4.5-2.5mm

With:Pipe Valve 32PCS and other necessary accessories 

Stainless Steel shelf

Pressure Meter 1 PCS

Origin:China

Quantity:1set

PP Sediment Membrane Filter:Made from Polypropylene material, with PP cartridge in the container

Parameter:

Model:WTJ3

Method of Working:By out side pressure

Flow Capacity:20-30m3/h

Pressure:0.2MPa

Height:mm

Diameter:Ømm

Wall Thickness:1.5mm

Filtering Material:Profax 5um

Number of Cartridge: PCS

Quantity:1set

Reverse Osmosis Equipment: Components include reverse osmosis membranes, Frame made from SS304, Multi-phrase Centrifugal Pump, PLC controller, Flow Meter, Pressure Monitor, Electromagnetic Vale for auto back wash and etc.

Parameter:

Model: RO-8000L/H)Reverse Osmosis System

Output Capacity≥8m3/h(water temperature 25℃)

Recovery Rate:≥75~90%

Pressure:0.9-1.2Mpa

Method of Working:Auto control and manual backwash

Origin:China

Equipments included:

Membranes:Reverse Osmosis Membrane ESPA3

Origin: USA Hydranautics

Quantity: PCS

Reverse osmosis housing/Pressure vessel: model, 3 PCS

Monitor, Meter and PLC system

A, High pressure and Low pressure Switch

B, Water-level-control Switch

C, Flow Meter

D, Pressure Monitor

E, Stainless steel panel for electric parts

Installation Material

A, Electricity wire, cable line, stainless steel shelf

B, Ø32 Food grade pipe

C, Food grade valve

Above listed price in total:USD FOB shenzhen

Golden Supplier for UN peace-keeping forces at Africa bases, your best trustworthy supplier and business partner in China.

Fortune line: 0086 one eight six 1713 two eight seven six (WhatsApp).